Consulting Hotline0755-2728-6106
phones number13312911695
Consulting Hotline0755-2728-6106
phones number13312911695
Your present position：Home > Product > Glue filling machine > Waterproof power supply fillin
Waterproof power supply fillinCategory：Waterproof power supply fillin
Hotline:0755-2728-6106
| Application: Drive power, lamp, ignition, solar junction box and other fillers glue glue
| Principle of operation：
1, the program editor: in-kind editing, and then Chen can be
2, will have been edited program storage, similar products can be transferred out.
3, irrigation head movement, the pump body (stepper motor drive) for the plastic
4, the movement trajectory: straight line. Curve. Point. Box. Round. W type, S type. Can take any irregular trajectory
5, Z axis up and down movement with ball shaft screw rapid response.
6, glue machine automatic ratio
| Parameters:
|
1 |
Proportion with glue |
2:1~1:1 |
|
2 |
Mixing method |
Dynamic mixing |
|
3 |
Machine travel |
680*680*100MM,itinerary can be customized according to the actual needs of the customer |
|
4 |
Counter tops |
table 1050*900,The effective working area 680*680mm,Two sets of positioning blocks can be adjusted with the fixture |
|
5 |
Programming mode |
Teaching programming |
|
6 |
Dimensions |
1220*1050*1500MM |
|
7 |
A pump |
Screw pump: wear-resistant, suitable for additives glue (China-German joint venture) |
|
8 |
B pump |
Screw pump: wear-resistant, suitable for additives glue (China-German joint venture) |
|
9 |
Glue power |
Bujin motor |
|
10 |
Tank Capacity |
A,B25L |
| 11 |
Glue against precipitation |
A,B stirring bucket |
|
12 |
A plastic flow |
2-30g/s |
|
13 |
A plastic head |
Number of head according to the product |
|
14 |
Input pressure |
0.5-0.7Mpa |
|
15 |
Machine power |
2000W |
|
16 |
Supply voltage |
AC220V±10%,50-60HZ |
| Device Configuration:
|
1 |
Control System |
Xinjie PLC + motion control card +7.2 inch Kunlun on-state touch screen |
|
2 |
Software system |
Zhonghu R&D independently, a domestic counterparts developed a software anti-misuse function, anti-fade automatic shutdown function |
|
3 |
Bujin motor |
YAKO Original motor |
|
4 |
Metering pump body |
Taiwan Precision adjustment wear type |
|
5 |
Cut off the system |
Zhonghu R&D independently |
|
6 |
Mixing device |
Zhonghu R&D independently |
|
7 |
Thermostat |
Silicone heaters |
|
8 |
Frame material |
A3*3mm manufacture |
|
9 |
Sliding device |
Taiwan HIWIN Slide rails |
| Features:
|
1 |
Friendly and concise interface |
Foolproof operation program design, simple operation, practical,
ordinary workers can learn all operating methods in 5 minutes |
|
2 |
High-end imported electronic control system |
The main electrical part of the wiring, dust, anti-static, have reached foreign standards |
|
3 |
Glue detection feedback function |
The drum part is equipped with low level alarm function, timely remind the glue to add |
|
4 |
Glue filter four protection |
Filter protection measures to reduce the mechanical pump body failure probability, to prevent impurities in the glue into the glue pipeline |
|
5 |
Large work surface |
Machine points around two, respectively, put two materials, the machine automatically continuous operation, with more efficient |
|
6 |
Equipment running more smoothly |
The overall frame with ultra-thick solid material, an effective solution to the machine when the high-speed movement of body shake, improve production stability and accuracy |
|
7 |
High precision mechanical pump body |
Precision adjustment wear type |
|
8 |
Automatic mechanical agitation |
The use of double-layer linear slide and high-precision balance block to ensure the accuracy of operations |
|
9 |
High precision operation |
The use of imported high-quality safety factor reliable silicone film fever, super protection |
| Characteristics of Three-axis Movement:
1, the operation is simple and convenient: touch screen display operation; all Chinese interface, the parameters of the record, display, alarm; for each product to provide the corresponding fixture, the workers training is simple, saving training time and training costs;
2, glue control precision: all key components are imported products, to ensure high speed, precision, while meeting the conditions of automated production under the high reliability requirements.
| Main features of machine：
1, with plastic, plastic irrigation integration, automatic operation, a machine to achieve two functions.
2, the proportion of setting adjustment, plastic volume adjustable. Ready to use at any time, with high precision, on-demand ratio, saving glue.
3, the operation is simple and convenient, the program is simple to edit, easy to disassemble, directly to the A B two kinds of glue were placed in two corresponding barrels, when filling with plastic, workers only need to press the switch can be.
4, according to the performance of the glue, A bucket with a thermostat device, B plastic bucket sealed to prevent volatile, liquid level sensor device, when the glue below this level automatically alarm, add the corresponding glue
5, easy to clean, AB glue mixing part of the mouth only the mixing tube, so the cleaning part of the mixing tube only, the other parts do not have to clean, if the get off work or to stop for a period of time only filling the mixing tube to take off, Clean on the line, supplies only mixing tube.
Consulting Hotline0755-2728-6106
phones number13312911695
Scan, focus on us
